RAM Mounts Form-Fit Halteschale (Schlüsselverriegelung) für Zebra ET60 & ET65 - mit & ohne Tastatur - Beheizte Pogo-Pins - 5.5mm DC & Dual USB-A-Anschluss
€706.95
previously €706.95
Available, delivery time: 1-2 Working days
This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.
The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.
An NFC repeater add-on module can be used to extend the device's internal NFC reader.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE25PD2HLU:
- Compatible with Zebra Keyboard
- Easy insertion and removal
- Additional mounting plate for attaching additional devices or accessories
- Usable with RAM Vent-Temp, Temp-Right, NFC-Repeater or Zebra CAC Reader
- Heated Pogo-Pins
- Lockable with key
- Input Connector: 5.5mm DC
- Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh)
- Transfer Speed: 12Mbps
- Input Voltage: 12V
- Input Cable Length: ca. 100 cm
- Output Cable Length: ca. 25 cm
- Certifications: RoHS, IC, FCC, WEEE, CE & UKCA
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE25PD2HLU holder is supplied.
| Hersteller: | National Products Inc.- 8410 Dallas Avenue South, Seattle, WA 98108, USA, www.rammount.com |
|---|---|
| Hole Pattern: | AMPS 4-Loch & VESA 75x75 |
| Manufacturer: | Zebra |
| Mounting: | Schrauben |
| Verantwortlich: | GF Kostja Dümke, info@rammounts.de, 030-917471-70 |
| Zebra Rugged PC: | ET60 & 65 |
| Importeur: | RAM Mounts Germany GmbH, Alexander-Meißner-Str. 42, 12526 Berlin, www.rammounts.de, Telefon: 030-917471-70 |
| Warnhinweis: | Plastiktüten von Kindern fernhalten - Erstickungsgefahr! |
| EAN: | 793442017643 |
Compatible
RAM-101U-2461
(410338)
Available, delivery time: 1-2 Working days
RAM-101U
(410898)
Available, delivery time: 1-2 Working days
RAM-101U-D
(580059)
Available, delivery time: 1-2 Working days
RAM-D-101U-2461
(582115)
Available, delivery time: 1-2 Working days
Compatible Base
RAM-2461U
(410687)
Available, delivery time: 1-2 Working days
RAM-202U
(410074)
Available, delivery time: 1-2 Working days
RAM-D-2461U
(410584)
Item not available - delivery time approx 8 weeks
RAM-D-202U
(410307)
Available, delivery time: 1-2 Working days
Compatible Arms
RAM-201U-B
(410903)
Available, delivery time: 1-2 Working days
RAM-201U
(410747)
Available, delivery time: 1-2 Working days
RAM-201U-D
(410648)
Available, delivery time: 1-2 Working days
RAM-D-201U-C
(410582)
Item not available - delivery time approx 8 weeks
RAM-D-201U
(410306)
Available, delivery time: 1-2 Working days
RAM-D-201U-E
(410432)
Available, delivery time: 1-2 Working days
Options
RAM-GDS-CHARGE-V9U
(583560)
Item not available
RAM-GDS-CHARGE-V10-1U
(586513)
Item not available
RAM-GDS-CAB-NFCU
(586400)
Available, delivery time: 1-2 Working days
RAM-DOCK-HEATER1-EU
(411297)
Available, delivery time: 1-2 Working days
RAM-VENT1-RND-50U
(586401)
Item not available - delivery time approx 8 weeks
RAM-VENT1-RCT-50U
(586384)
Item not available - delivery time approx 8 weeks